Timeline:
1865 to 1869 - Amana Colonists built a seven-mile-long
canal stretching from the Iowa River near West Amana, through Middle
Amana, then through Amana, and into Price Creek, just past town, where
it continued to the river. They dug it with human, oxen, and steam power
so it could provide waterpower to the mills in Middle Amana and Amana.
A dredge helped to complete the project. The colonists built a dam to
divert water from the Iowa River into the canal. The water turned water
wheels, which in turn powered the shafts for the machinery in the mills.
This race provided waterpower for the two textile mills and one flour
mill which the Amana Society operated.
1908 - The original wooden dam was replaced by one made of poured concrete.
1920's - The Amana Society took out the shaft drives and replaced them
with an electrical generator to power the machinery. A boat annually
dredged the canal to remove silt until the electrical generators were
installed and the water moved more constantly and less silt settled
in the race.
1993 - The flood put a stop to the use of the generators because they require more water than the
weakened sides of the race can contain.. At the time it was hoped this is temporary. The Amana
Colonies Historic Sites Foundation and the Amana Society, Inc.
secured grant monies to assist in repairing the millrace.
It is unknown if the millrace was repaired and the generators have been put back into operation.


No comments:
Post a Comment
Note: Only a member of this blog may post a comment.